Aerial Lift

Posts Tagged ‘Bucket’

If you’re in an aerial lift, and it tips over, should you try to hold on to the bucket, try to jump clear, or what? What is the industry best standard?

1998 Ford E-350 with a Gas Engine and an Automatic Transmission with a Versalift Vantel 29N, 34′ work-height, Non-Insulated, Telescoping, Aerial Bucket Van. This unit has a NEW ANSI and DOT Inspection as well as a 30 Day Warranty!

Get an Overview of the Common Uses of Bucket Trucks.

If you are not sure if you business would benefit from a new utility truck, consider some of the most common uses for bucket trucks. You might know them as cherry pickers, boom trucks, aerial trucks, or just utility trucks, but you should be aware that they have even more uses than names. Once you have decided to purchase an aerial bucket truck, you should also know that Utility Fleet carries a wide selection of this type of equipment. If you are new to working with boom trucks, it is especially important to obtain the advice from experts in the field, which includes Utility Fleet’s staff.

The primary use of bucket trucks is to lift one or two workers safely into the air to perform the job at hand. You might often see electricians, utility workers, and construction workers use this kind of truck on a daily basis. However, many other industries also have a need for bucket trucks for sale. Tree maintenance professionals, painters, and window washers also clearly rely on this type of equipment to perform their job everyday.

Additionally, bucket trucks have been used in emergencies, such as by firemen who need to reach up high with equipment more durable than a ladder. During the holidays, you might observe a bucket truck being used to put decorations on buildings or tall trees, and subsequently take them down. Thus, some bucket trucks for sale are not just used for daily tasks, but also for special occasions. If such a wide variety of businesses use boom trucks, it is likely that yours could use one at some point, as well.

Any business that often has to reach higher than their ladder or other vehicles will allow them to do in a safe manner can use a boom truck. If you are still unsure if this kind of equipment is right for your company, ask a Utility Fleet staff member. Even if it turns out that your company would only use such a truck once in a while, you can find out about rental trucks from Utility Fleet.

www.asset-auctions.com Dominion August 18th

View more details at www.VersaliftEast.com Unit # 7166-1623 – 2000 Sterling M8500 with 3126 CAT Diesel, Alliston Automatic, with a Lift All LAOC-55-1S Overcenter Aerial Lift. 188″ Wheel Base, Engine Block Heater, Air Conditioning, AM/FM Radio, 130 Amp Alternator, 75 Gallon Fuel Tank, Power Steering, Michelin Tires.

When it comes to trucks available in the market, one of the known names in the market are the altec bucket trucks.  They have a lot of different trucks that different companies can use in order to help them finish their jobs without any problems.

For a number of years, the trucks made by Altec are considered to be among the high quality ones that can be found in the market.  Their trucks are known to really stand on the daily challenges of construction and other heavy works that the industry needs in order to get the operation or project going.

They offer Altec bucket trucks as well as digger derricks that are made with the utmost quality and design fit for the line of business where the company is held under.  In this way, they would have rugged and reliable trucks that will help them do what people cannot do.

In order to have an idea about the number of trucks that Altec makes, the following are their product lines that include different truck types that will work on any industry that will need them.

They have the Altec Hi Line series that can work given the utmost working height.  The working height can reach up to 150 feet and with the maximum handling capacity of up to 454 kilograms.

The A product line has a lot of other product lines under this letter or set.  If you will look on the bucket trucks included on this set, they are usually composed of overcenter or non-overcenter trucks.  Aside from this, there are also some other trucks that can handle materials up high so they can also bring their materials up on the needed height.  Aside from this, the A product line also include aerial cable placer trucks.  These are perfect for the industry that are working in electrical or telecommunications industry since they may need to change the cables for maintenance.

The next product line is the F set.  The main feature of the bucket trucks under this set is fly boom articulation that can reach up to 180 degrees.

The third set is the L product line.  The trucks under this set do not have a real high working height.  Some of them have booms that are rear mounted.  Aside from this, some trucks would also include those looking like trailer trucks that can offer spacious bodies that will serve as good storage places.

The last is the T product line.  The trucks on this set also do not have a very high working height.  The maximum only reaches up to 54.9 feet.

In conclusion, the altec bucket trucks come in different designs and product lines suited for every industry.  The company would just need to set their needs in terms of tasks and they will surely find the best trucks that they can use.  Since there are already a lot of dealers, companies will surely find the ones that can provide the trucks at a cheaper price.

Boom Information Make – Altec Model – AT200A Working Height – 35′ Classification – Non-Insulated Vehicle Information Make – Ford Model – F350 Year – 1999 Driveline – 4 X 2 Engine – 7.3L Powerstroke Fuel Type – Diesel Transmission – Automatic Mileage – 234456 miles Stock – 9251 * Power Inverter w/Power at Boom Tip and Curbside of Body * Hydraulically Leveled End Mounted Bucket w/ Door * 300 lb Platform Capacity * Engine Start/Stop at Upper and Lower Controls * Dual Strobe Lights * Ladder Rack * Pintle Hitch * A/C * AM/FM Radio Location – Bryan, TX Price – $19900

The electrical, telecommunications and construction industries have been hit particularly hard by the latest recession.  Many of these companies are searching for new ways to cut costs, so they can either continue to expand, or even just stay in business.  One area where these industries typically make large capital outlays is in equipment.  Many companies of any size have a need for large numbers of bucket trucks, digger derrick trucks, crane trucks and boom trucks.

These types of trucks tend to be highly specialized to the task they are meant to perform.  While the most common is the bucket truck used by power linemen working for electric utility companies, the basic bucket truck chassis can be used for a number of variations on the aerial lift truck. Some common types are derrick digger trucks, boom trucks and crane trucks.

Unfortunately for the cost-conscious buyer, these types of trucks can be very expensive when purchased new.  This is especially true when a truck is customized to the buyer’s exact specifications.  Fortunately, there is a cost-effective alternative for public utilities and private companies wishing to spend significantly less on their equipment.  That alternative is to purchase used bucket trucks when possible.

This is often a good way to go, because these types of trucks have been built to be extremely tough and durable.  If you look out for used bucket trucks that have relatively low mileage and that have been reconditioned, you may find exactly the truck you need at a fraction of the new price.

One way to shop for used bucket trucks is to go online.  Simply type  “used bucket trucks” into any search engine and you will get numerous results showing online retailers like I80. From there, it’s simply a matter of searching for the model you want within the price range you are looking at.  Since you probably won’t be able to look at the truck personally, there are some things you should keep in mind.

One of the first questions to ask an online dealer is if the used bucket truck you are interested in purchasing has been inspected and reconditioned.  You also need to find out if the truck meets OSHA standards for the type of work you wish to use it for. For these reasons, it’s important to go with a reputable dealer that will take the time to answer your questions.  Also make use of features like i80’s video feeds and photo galleries of each truck.  The more information you can get up front, the better.

You may just find the perfect vehicle for your needs at a fraction of what you were expecting to pay.

http://www.i80equipment.com

Since large utility companies are among the biggest users of bucket trucks, they are faced with the challenge of using numerous trucks for a variety of purposes.  Planning what kinds of trucks are needed for various tasks can be a challenging undertaking.

Large electric utilities may need upwards of 500 trucks at any given time.  They typically use a combination of bucket trucks, crane trucks, boom trucks, digger derrick trucks and various flatbed configurations.  Many companies cover large areas, sometimes an entire state; which means they need to have trucks appropriate to any number of conditions and terrain.

Many large utility companies have found that it’s helpful to buy as many trucks as possible from the same manufacturer.  Even if they are different styles, many of the parts tend to be the same, and mechanics get more accustomed to certain types of trucks, improving their efficiency in the long run.

Planning fleet sizes and needs is a complex process that involves working with internal customers to determine what their needs will be. Many utility companies don’t hesitate to share the cost of unusual or expensive equipment with those customers, especially if buying the equipment falls outside of their usual budget.  One category of items that typically fall outside of the norm are elevators that are used to extend the aerial lifts on bucket trucks by 10 feet or more.  Some utilities will also purchase trucks on their customer’s behalf and let the customer make payments.  Each utility needs to look at what their customer’s needs are and balance it with budgetary concerns.

The larger electric utility companies will have numerous maintenance facilities around their area of operation and a full complement of mechanics at each one.  They have realized that they can spend less on maintenance and have trucks back in operation much more quickly than if they use a third party for repairs.

The public utilities face a number of concerns.  Aside from the ever-present specter of budget cuts, they are also dealing with an aging workforce that is retiring more quickly than it can be replaced.  Experienced drivers, line workers and mechanics are all retiring at a rapid rate, and utilities are finding it difficult to hire enough workers with the requisite training and experience. This poses an additional challenge for fleet planners, as they try to make sure that all locations have an adequate number of experienced drivers and mechanics that can train and mentor the new ones.

Another work-force related problem is that many utilities have their mechanics work a second shift so they don’t have trucks out of commission during the day shift when most crews are working.  The odd-hour shifts make it more difficult to attract workers, and often have to pay more as an incentive to work those hours.

Though there are many challenges facing the fleet planners of large electric utility companies, many are meeting those challenges by finding ways to utilize the many hundred s of bucket trucks, derrick digger trucks, and boom trucks effectively and efficiently.

http://www.i80equipment.com

The telecommunications, electrical as well as construction industries have also been specifically affected by the recent economic meltdown. As a result of the latest recession, several of these companies are looking for alternative way to slash off expenses in order to allow for their continuous expansion, or simply just sustain the business and keep in running. One area where these industries typically make large capital outlays is in equipment.  Many companies of any size have a need for large numbers of bucket trucks, digger derrick trucks, crane trucks and boom trucks.

These types of trucks tend to be highly specialized to the task they are meant to perform.  While the most common is the bucket truck used by power linemen working for electric utility companies, the basic bucket truck chassis can be used for a number of variations on the aerial lift truck. The usual types of specialized vehicles are: digger derrick trucks, boom trucks and crane trucks.

Regrettably for buyers who are extremely conscious when it comes to their expenses and the prices of equipment, these types of trucks can turn out to be extremely expensive when acquired new.  This is particularly true given that a truck is modified to the strict specifications of the buyer.  Luckily, there is a cost-effective option for private companies as well as public utilities to spend a lesser amount when it comes to their equipment.  One way is to buy used bucket trucks if possible.

This is can be considered as a good alternative particularly if the company is dead set to cut costs. If the company tries to look out for used bucket trucks that have comparatively low mileage and the kind that have been overhauled, it is possible to locate the right truck the company wants at a price which is comparatively cheaper. One method to find used trucks is to search the Internet and search for “used bucket trucks”. There are countless retailers online and one of the more trusted ones is I80. With I80 Equipment’s site, it is easy to find the right truck given that the kind of model is specified along with the range of budget. To find out more please visit http://www.i80equipment.com